Scytek-electronics GALAXY G40RS Manuel d'utilisateur télécharger pdf (Page 4)

G 40RS - Page 3

Adding/Replacing Transmitters

To replace lost or stolen transmitters or to add additional transmitters into the system, have all desired

transmitters ready and follow the steps below.

Note: Up to four transmitters can be programmed to operate the system. To erase any previously stored

transmitter codes, be sure to program all 4 transmitter memory locations.

To program transmitter(s):

1. Turn the ignition key On, Off, On, Off, and back On.

· The parking lights will flash 3 times.

2. Press and hold the Override switch for 5 seconds.

· The parking lights will flash 5 times.

· The LED will illuminate.

3. Press Button 1 on the first transmitter.

· The parking lights will flash once.

4. Repeat steps 3 and for each transmitter (up to 4).

5. Turn off the ignition key.

· The parking lights will flash 3 times.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Scytek-electronics GALAXY G40RS Manuel d'utilisateur Page 4