Scytek-electronics 3000Plus Series Manuel d'utilisateur télécharger pdf (Page 19)

Galaxy 3000 Plus - Page 15

Jumper Selections

Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the polarity

jumpers will be visible next to the parking light and dome light relays. Set the jumpers for the correct

polarity output as described below, then reassembly the main unit case.

Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.

Left Pin + Center Pin = positive

Right Pin + Center Pin = negative

Dome Light Output. Selects the polarity (+/-) for the output of the on-board Illuminated Entry relay.

Left Pin + Center Pin = positive

Right Pin + Center Pin = negative

Jumper SSettings

default settings shown

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Pas de commentaire

Scytek-electronics 3000Plus Series Manuel d'utilisateur Page 19